Heat Resi board adhesive 310ml
Vitcas® Heat Resistant Filler is a ready mixed material for filling small cracks and joints in high temperature areas. On the joints of High Temperature Plasterboard. Resistant up to 1000°C /1830°F
Main uses of Heat Resistant Filler:
Make sure the area is clean and that all dirt, dust and grease is removed. Cut off the top of the cartridge, screw on the nozzle and cut the nozzle to the required size. Apply to the area to be filled using a cartridge gun. Smooth the surface with a clean scraper. The material will set faster when warm. If required the surface may be sanded once the filler has set. Certain types of emulsion paint may require the use of a proprietary stabilising primer before application - check with the instructions on the paint.
Vitcas® Heat Resistant Filler can be sanded and overpainted with water based emulsion paints..
Resistant up to 1000°C /1830°F
For interior use only
Coverage: A guide to the amount of the material contained in one 310ml cartridge
Bead dia. 4mm – length approx. 18 metres
Bead dia. 6mm – length approx. 8 metres
Bead dia. 8mm – length approx. 5 metres
Bead dia. 10mm – length approx. 3 metres
Warning: Last items in stock!
|Other||up to +1000*C /1830*F|